AAPT 2015 Student Poster Session

The AAPT 2015 Annual Meeting and Technical Session included a Student Poster Session. This program was a great success. The posters were available throughout the 2015 Annual Meeting and Technical Sessions in Portland, OR. The AAPT Student Poster Session is a valuable opportunity for student authors to present ongoing or completed research and meet with interested AAPT members for in-depth technical discussion.

The posters were judged by a selection of AAPT members and the winner was:

Laboratory Comparison of Full Depth Reclamation Stabilization Techniques Using Arkansas Field Materials

Chase Henrichs - Graduate Research Assistant, University of Arkansas


2015 Poster Session Program

  1. TOWARDS IMPLEMENTATION OF THE SURFACE PERFORMANCE GRADED (SPG) SPECIFICATION FOR CHIP SEAL BINDERS
    Shi Chang, Amy Epps Martin - Texas A&M University, College Station, Texas
    Edith Arambula - Texas A&M Transportation Institute, College Station, Texas

    Abstract | Poster
  2. Testing for Mechanical Properties of FAM and Its Relation to Asphalt Concrete Mix
    Padmini Gudipudi - PhD Student, Arizona State University

    Abstract | Poster
  3. Performance-Based Methodology for Selection of Long Lasting and Cost-effective Pavement Rehabilitation Treatments
    Mona Nobakht - Graduate Research Assistant, Texas A&M University
    Maryam S. Sakhaeifar - Assistant Professor, Zachry Dept. of Civil Engineering, Texas A&M University
    Dave Newcomb - Senior Research Scientist, Texas A&M Transportation Institute
    B. Shane Underwood - Assistant Professor, Arizona State University

    Abstract | Poster
  4. Development of New Dynamic Modulus Predictive Model for Hot Mix Asphalt Concrete
    Pooyan Kabir - Graduate Research Assistant, Zachry Dept. of Civil Engineering, Texas A&M University
    Maryam S. Sakhaeifar - Assistant Professor, Zachry Dept. of Civil Engineering, Texas A&M University
    Y. Richard Kim - Professor, Department of Civil, Construction & Environmental Engineering, North Carolina State University

    Abstract | Poster
  5. Laboratory Comparison of Full Depth Reclamation Stabilization Techniques Using Arkansas Field Materials
    Chase Henrichs - Graduate Research Assistant, University of Arkansas

    Abstract | Poster
  6. COMPARING LAYER TYPES FOR THE IMPLEMENTATION OF MEPDG FOR FDR DESIGN
    Sadie Smith - University of Arkansas

    Abstract | Poster
  7. Investigating the Interaction of Non-Tracking Tack Coat and Aggregate on Bond Strength
    Ah Young Seo - Graduate Research Assistant, Zachry Department of Civil Engineering, Texas A&M University
    Maryam S. Sakhaeifar - Assistant Professor (Corresponding Author), Zachry Department of Civil Engineering, Texas A&M University
    Bryan T. Wilson3 - Associate Research Scientist, Texas A&M Transportation Institute

    Abstract | Poster
  8. Performance Based Selection of RAP-RAS in Asphalt Mixtures
    James Darnell - Oregon State University

    Abstract | Poster
  9. Low temperature performance of Laboratory produced Asphalt Rubber Mixes containing polyoctenamer
    Ka Lai N. Ng Puga and R. Christopher Williams - Department of Civil, Construction and Environmental Engineering – CCEE, Iowa State University

    Abstract | Poster
  10. Experimental characterization of ethanol-based asphalt foaming process
    G. G. Ribeiroa, H. M. Yin - Department of Civil Engineering and Engineering Mechanics, Columbia University

    Abstract | Poster
  11. Dynamic Modulus, Fracture Toughness, and R-Curve of Asphalt Concrete
    Shu Yang, Graduate Research Assistant, University of Arkansas,Engineering Center

    Abstract | Poster